Wednesday, September 6, 2017

Give Me an "L"! Give Me an "M"!

No, I'm not leading a cheer squad, just fancying up some plain monogram letters with Eyelet Outlet Washi Tape, Bling and Brads for my niece, Lindsay, and my nephew, Matthew, who both have birthdays coming up. Check it out on the Eyelet Outlet Blog!


I started with plain, kraft-colored, papier mache letters from the big box store, that are approximately 8" tall. Thanks to my colorful stash of washi tape, I had a plan that did not involve any tracing, cutting, painting, or even inking of edges! I began with the "L" since it had the more straightforward shape, and wrapped tape, in more or less spectrum order, from the top to the bottom. Since all the planes are square, this just meant lining the layers up neatly and overlapping the patterns at the back of the letter.


The only tricky bit was the tippy-top of the letter and the top and bottom of the horizontal stroke at the bottom of the "L", which I covered in neat strips of whatever tape I planned to use next on the front of the letter, in this case the Red Dots Tape and Orange Fans . In addition to those, I also used: Heart Tape, Admit One Tickets, Tape Measure, Cooking Tape, Skinny Green Stripe (two strips for a chunkier look), Blue/White Dots, Skinny Blue, Blue Check (again two strips), Cupcakes, Purple Zig Zag, Rainbow Chevron, Love, Smiley Face, and Crayons.


Once the entire letter was covered, I broke out the bling to add a little bit of sparkle! I love the brand new Fancy Long Bling Strips, they come in several styles and they're not just great looking, they stick on really well AND are flexible enough to wrap around the letter! Before I started attaching them, though, I laid out the styles I thought I wanted to use, and moved them about a bit, until I got the perfect mix. Then I cut each of the strips just slightly larger than I needed, and, with the backing still on, checked my potential placement a second time, to make sure that I would not wind up with a big, un-bend-able stone right on a corner that would not be able to lay flat. Then, I peeled and stuck on the bling strips, from front to back, trimming any overlapping stones and getting them to line up as neatly as possible at the back. The designs I used include two types of Fancy Long Bling, Green Pearl Strips and Purple Jewel Strips.


After I had the strips in place, I added some individual gems, including Blue Flower Jewels, the brand new Heart Jewel Bling and Red Heart Pearls.

The slanting lines in the center of the "M" made it a little more challenging, but not overwhelmingly so. I elected to just wind the tape around in strips, the same way I did with the "L". This means there's a little "jog" at the back of the letter where the two ends of each tape meet up, but I trimmed them neatly, in the same way each time, and decided to call it a "Design Decision"! I've got a bit of a transportation theme going on for Matthew's initial, so I incorporated multiple strips of Road Tape and Map Tape into my design. In addition I used: Blue Check, Skinny Blue, Red DotsHeart TapeSmiley Faces, Admit One, Dots, Skinny Green Stripe and Tape MeasureOnce my background was completed, I started adding vehicles to the design. I've got: a Work Truck, a Bicycle and one the brand new adorable Pickup Truck Brads that are coming to the store very very soon! Not to mention a Cupcake, some Sun and Cloud Brads and an Airplane from the Travel set. I've also got some fun sentiment Arrows from the Road Sign Set and the Bicycle Set.


You may be wondering how I got those to stay on, seeing as how I could not reach the backs to open the prongs? Since I knew the "M" was hollow, I just made a hole with my paper piercer like I would for any other project, but coated the prongs of each brad with a little bit of 3-In-1 Glue before poking the prongs into the letter. For the larger brads, I added a little more glue to the back surface of design for additional sticking power. (I should mention that all of my nieces and nephews are well above toddler age and unlikely to attempt putting monogram letters into their mouths!)

I hope you'll be inspired to try your favorite Eyelet Outlet embellishments on your next 3-D project! ♥

4 comments:

  1. Fantastic it must have taken hours. They are going to be so excited. it sure has the "WOW" factor.

    ReplyDelete
  2. these are great gifts and they'll love them. X

    ReplyDelete

the *BEST* part of blogging is the comments, dontcha think? thanks for taking time to leave one! ~♥~